3.0

CUBASE SX/SL
10 – 40 Tascam US-428
DSP Factory (Cubase SX/SL for Windows only)
The following US-428 controls will remote control the following DSP
Factory parameter for each channel strip:
• Fader: volume
• Mute/Solo: mute and solo (selected via the Solo switch)
• Select: selects channel for editing
• Pan-Dial: pan
• EQ-Gain
Controls the corresponding EQ gain for each band selected with the Low, LoMid,
HiMid and High buttons.
• EQ-Freq
Controls the corresponding EQ frequency for each band selected with the Low, LoMid,
HiMid and High buttons.
• EQ- “ Q”
Controls the corresponding EQ “Q” for each band selected with the Low, LoMid,
HiMid and High buttons.
• Aux 1 to Aux 4 and shuttle wheel:
Control the effect send levels for sends 1/2 and 5/6.
• Holding down the “ Asgn” button and pressing the Low, LoMid, HiMid
and High EQ buttons switches the corresponding EQ band “Bypass”
button status.
• Holding down the “ Asgn” button and pressing the Aux1 to Aux4 but-
tons switches the effect sends 1/2 and 5/6 “On” button status.