2.0

CUBASE SX/SL
2 – 6 CM Automation Motor Mix
Specifications
The CM Motor Mix can control any number of channels in groups of 8.
• Press the “<“ and “>” buttons (at the top of the View section) to se-
lect channels 1-8, 9-16 etc. Hold down Shift and press “<“ or “>” to
shift the fader assignment in steps of one channel.
• Press F1 to disable/enable the fader motors.
• Use the Select buttons (the row of buttons next to the display) to se-
lect a single track for detailed settings.
• The Mute and Solo buttons are used to mute or solo a track.
• The assignment of the buttons in the first row below the dials de-
pends on the selected parameter group.
• In the View section, select Rec/Rdy to use the second row of buttons
below the dials for arming a track for recording.
• In the View section, select Write or “fnct B” to control the Write or
Read buttons in the Cubase SX/SL mixer. When Write/fnct B is se-
lected, selecting the All button in the bottom left section of the CM
Motor Mix controls the Write All/Read All buttons in the Cubase SX/
SL mixer.
• The Auto Enbl button controls Start/Stop in Cubase SX/SL.
• The Suspend button controls the Record function in Cubase SX/SL.
• Press the DSP button to move the project cursor to the start of the
project.
Hold down Shift and press the DSP button to move the project cursor to the end of the
project.
• Press the Window button to move the project cursor to the left locator.
Hold down Shift and press the Window button to move the project cursor to the right
locator.
• Press the Default button to switch automatic punch in on or off.
Hold down Shift and press the Default button to switch automatic punch out on or off.
• Press the Undo button to undo the last action in Cubase SX/SL.
Hold down Shift and press the Undo button to “undo the undo”.