3.0

CUBASE SE
Logical Presets, Transformer and Input Transformer 4 – 67
The two modes
The Mode pop-up menu contains two options: Filter and Transform.
• In Filter mode, only the filter conditions (the upper list) are taken into
account. All events matching the conditions set up will be filtered out
(excluded from the recording).
• In Transform mode, events matching the filter conditions will be trans-
formed according to the settings in the action list (the lower list).
Setting up filtering and actions
• Click the Add Line buttons to add lines to the filter condition list or
action list.
To remove a line, click it to select it and click the Delete Line button to the right.
• Clicking the columns in the filter condition list opens pop-up menus
allowing you to specify the conditions to match.
• Clicking the columns in the action list opens pop-up menus allowing
you to specify what should be done to the found events (when Trans-
form mode is selected).
For detailed descriptions of the filter conditions and action columns,
see page 53.
• Clicking the Init button will reset the selected module, removing all fil-
ter condition and target list lines.
• The settings are active as soon as you activate an Active Module
checkbox.
The settings made in the activated modules will affect all MIDI data you record on the
track.
• Closing the Input Transformer window does not turn it off – you need to
deactivate all Active Module checkboxes for this!
A lit Input Transformer button in the Inspector indicates that one or more modules are
active.