3.0

CUBASE SE
Logical Presets, Transformer and Input Transformer 4 – 63
Operation
This setting determines what to do with the Action Target. The options
on this pop-up menu are different depending on the selected Action
Target. Below, all available operations are listed:
Add
Adds the value specified in the Parameter 1 column to the Action Target.
Subtract
Subtracts the value specified in the Parameter 1 column from the
Action Target.
Multiply by
Multiplies the Action Target value with the value specified in the
Parameter 1 column.
Divide by
Divides the Action Target value by the value specified in the Parameter
1 column.
Round by
This “rounds” the Action Target value using the value specified in the
Parameter 1 column. In other words, the Action Target value is changed
to the closest value that can be divided by the Parameter 1 value.
Set Random Values between
This will set the Action Target value to a random value within the range
specified with Parameter 1 and 2.
Set Relative Random Values between
This will add a random value to the current Action Target value. The
added random value will be within the range specified with Parameter
1 and 2. Note that these can be set to negative values.
For example, if you set Parameter 1 to -20 and Parameter 2 to +20,
the original Action Target value will get a random variation, never ex-
ceeding ±20.