3.0

CUBASE SE
4 – 62 Logical Presets, Transformer and Input Transformer
Specifying actions
The lower list in the Input Transformer window is the action list. This is
where you specify any changes that should be made to the found
events (relevant for all function types except Delete).
The handling of the action list is similar to the filter condition list, but
without the booleans. You simply add lines by clicking the Add Line
button to the right, and fill out the columns as required. To remove a
superfluous action line, select it and click the Delete Line button.
Action Target
This is where you select the property that should be changed in the
events:
Option Description
Value 1 This adjusts value 1 in the events. As described on page 55, the meaning of
value 1 depends on the event type. For notes, value 1 is the pitch.
Value 2 This adjusts value 2 in the events. As described on page 55, the meaning of
value 2 depends on the event type. For notes, value 2 is the velocity value.
Channel Allows you to change the MIDI channel setting. See page 57.
Type Allows you to change an event from one type to another, e.g. transform
aftertouch events to modulation events.
Value 3 This adjusts value 3 in the events, which is used for handling of Noteoff-
velocity when searching for properties. See page 58.