3.0

CUBASE SE
Working with System Exclusive messages 3 – 45
1. Open the Preferences dialog from the File menu (on the Mac, this is lo-
cated on the Cubase SE menu) and select the MIDI–MIDI Filter page.
This allows you to govern which MIDI event types should be recorded and/or thru-put.
2. Deactivate the Sysex checkbox in the Record section, but make sure
the Sysex checkbox in the Thru section is activated.
With this setting (shown in the figure above) SysEx messages will be recorded but not
echoed back out to the instrument (which could lead to strange results).
3. Activate recording on a MIDI track and initiate the dump from the front
panel of the instrument.
4. When done recording, select the new part and open the List Editor
from the MIDI menu.
This allows you to check that the System Exclusive dump was recorded – there should
be one or several SysEx events in the part/event list.