3.0

CUBASE SE
MIDI effects 2 – 41
XG Global Settings
In this mode, the parameters affect global settings in the instrument(s).
Changing one of these settings for a track will in fact affect all MIDI in-
struments connected to the same MIDI output, regardless of the MIDI
channel setting of the track. Therefore, to avoid confusion it might be a
good idea to create an empty track and use this only for these global
settings.
The following controls are available:
Control Description
Eff. 1 This allows you to select which type of reverb effect should be used: No
effect (the reverb turned off), Hall 1-2, Room 1-3, Stage 1-2 or Plate.
Eff. 2 This allows you to select which type of chorus effect should be used: No
effect (the chorus turned off), Chorus 1-3, Celeste 1-3 or Flanger 1-2.
Eff. 3 This allows you to select one of a large number of “variation” effect types.
Selecting “No Effect” is the same as turning off the variation effect.
Reset Sends an XG reset message.
MastVol This is used to control the Master Volume of an instrument. Normally you
should leave this in its highest position and set the volumes individually
for each channel (with the volume faders in the Cubase SE mixer or in
the Inspector).