3.0

CUBASE SE
MIDI devices 1 – 15
• To add another MIDI event (e.g. Bank Select) click directly below the
last event in the list and select a new event from the pop-up menu that
appears.
After adding a new event, you need to set its value in the Value column, as with Program
Change.
• To replace an event, click on it and select another event from the pop-
up menu.
For example, a MIDI device may require that a Bank Select message is sent first, fol-
lowed by a Program Change message, in which case you would need to replace the
default Program Change message with a Bank Select message and add a new Pro-
gram Change after that.
• To remove an event, select it and press [Delete] or [Backspace].
Different devices use different schemes for Bank Select. When you in-
sert a Bank Select event, you should check the device’s documentation
to find whether to choose “CC: BankSelect MSB”, “Bank Select 14 Bit”,
“Bank Select 14 Bit MSB-LSB Swapped” or possibly some other option.
Add Multiple Presets
This opens a dialog, allowing you to set up a range of presets to be
added in the selected bank or folder.
Proceed as follows:
1. Add the event types required for selecting a patch in the MIDI device.
This is done just as when editing the settings for a single event: clicking in the event
display brings up a pop-up menu from which you can select an event type.