3.0

CUBASE SE
1 – 12 MIDI devices
Renaming patches in a device
The pre-configured devices list is based on the factory-preset patches,
i.e. the patches included in the device when you first bought it. If you
have replaced some of the factory presets with your own patches, you
need to modify the device so that the patch name list matches the ac-
tual device:
1. In the MIDI Device Manager, select the device in the Installed Devices
list.
2. Activate the Enable Edit checkbox.
When this is turned off (default) you cannot edit the pre-configured devices.
3. Use the Patch Banks display to locate and select the patch you want
to rename.
In many instruments, the user-editable patches are located in a separate group or bank.
4. Click on the selected patch in the Patch Banks list to edit its name.
5. Type in the new name and click OK.
6. Rename the desired patches in this way, and finish by deactivating
Enable Edit again (to avoid modifying the device by accident).
• It’s fully possible to make more radical changes to the patch structure in
a device as well (adding or deleting patches, groups or banks).
For example, this would be useful if you expanded your MIDI device by adding extra stor-
age media such as RAM cards, etc. The available editing functions are described below.