3.0

CUBASE SE
MIDI devices 1 – 11
Selecting a patch for an installed device
If you return to the Project window at this point, you will find that the in-
stalled device has been added to the MIDI Output menus (in the track
list and the Inspector). Now you can select patches by name, in the fol-
lowing way:
1. Pull down the Output menu (in the track list or Inspector) for a track
that you want to play the installed device, and select the device.
This directs the track to the MIDI output specified for the device in the MIDI Device Man-
ager. The bank and program fields in the track list and Inspector are replaced by a single
Programs field that currently reads “Off”.
2. Click the Programs field to display a pop-up menu, hierarchically list-
ing all the patches in the device.
The list is similar to the one displayed in the MIDI Device Manager. You can scroll the list
up and down (if required), click the plus/minus signs to show or hide subgroups, etc.
3. Click a patch in the list to select it.
This sends the appropriate MIDI message to the device. You can also scroll the pro-
gram selection up or down, as with any value.