9.5

Included Effect Plug-ins
Delay Plug-ins
Speed – Sync
Activates/Deactivates tempo sync for the Speed parameter.
Range Lo/Hi
Set the range of the filter frequency modulation. Both positive (for example, Lo set to
50 and Hi set to 10000) and negative (for example, Lo set to 5000 and Hi set to 500)
ranges can be set. If tempo sync is off and Speed is set to zero, these parameters are
inactive and the filter frequency is controlled by the Freq parameter instead.
Spatial
Introduces an offset between the channels to create a stereo panorama effect for the
filter frequency modulation. Turn clockwise for a more pronounced stereo effect.
Filter Resonance LFO Modulation
Q-Factor
Sets the resonance of the filter. It is only available if filter resonance LFO tempo sync
is deactivated and the Speed parameter is set to 0. If tempo sync is activated, the
resonance is controlled by the Speed and Range parameters.
Speed
Sets the speed of the filter resonance LFO modulation. If tempo sync is activated, this
parameter sets the base note value for tempo syncing the modulation.
If tempo sync is deactivated, the speed can be set freely with the Speed knob.
Speed – Sync
Activates/Deactivates tempo sync for the Speed parameter.
Range Lo/Hi
Set the range of the filter resonance modulation. Both positive (for example, Lo
set to 50 and Hi set to 100) and negative (for example, Lo set to 100 and Hi set to
50) ranges can be set. If tempo sync is deactivated and Speed is set to zero, these
parameters are inactive and the filter resonance is controlled by the Q-Factor
parameter instead.
Spatial
Introduces an offset between the channels to create a stereo panorama effect for the
filter resonance modulation. Turn clockwise for a more pronounced stereo effect.
MonoDelay
This is a mono delay effect that can either be tempo-based or use freely specified delay time
settings.
Cubase LE Cubase AI Cubase
Elements
Cubase
Artist
Cubase
Pro
Nuendo
Included with X X X X X X
Side-chain
support
– – – X X X
6