9.5

Included Effect Plug-ins
Dynamics Plug-ins
Frequency Band Editor
The frequency band editor in the upper half of the panel is where you set the width of the
frequency bands as well as their level after expansion. The vertical value scale to the left shows
the gain level of each frequency band. The horizontal scale shows the available frequency range.
● To define the frequency range of the different frequency bands, use the handles at the
sides.
● To attenuate or boost the gain of the frequency band after expansion, use the handles on
top of each frequency band.
Live
If this button is activated, the look-ahead feature of the effect is deactivated. Look-
ahead produces more accurate processing, but adds a specific amount of latency
as a trade-off. If Live mode is activated, there is no latency, which is better for live
processing.
Bypassing Frequency Bands
To bypass each frequency band, activate the Bypass Band button in each section.
Soloing Frequency Bands
To solo a frequency band, activate the S button in each section. Only one band can
be soloed at a time.
Output (-24 to 24 dB)
Sets the output level.
50