9.5

Table Of Contents

Included Effect Plug-ins

Dynamics Plug-ins

Live

If this button is activated, the look-ahead feature of the effect is deactivated. Look-

ahead produces more accurate processing, but adds a specific amount of latency

as a trade-off. If Live mode is activated, there is no latency, which is better for live

processing.

Bypassing Frequency Bands

To bypass each frequency band, activate the Bypass Band button in each section.

Soloing Frequency Bands

To solo a frequency band, activate the S button in each section. Only one band can

be soloed at a time.

Output (-24 to 24 dB)

Sets the output level.

Shaper Section

You can specify the Attack, Length, and Release by moving breakpoints or using the

corresponding knobs. Be careful with levels when boosting the gain. You can reduce the output

level to avoid clipping.

Attack (-20 to 20 dB)

Sets the gain of the attack phase of the signal.

Length (5 to 200 ms)

Sets the length of the attack phase.

Release (-20 to 20 dB)

Sets the gain of the release phase of the signal.

Sensitivity (-40 to -10 dB)

Sets the sensitivity of the detection.

Output

Sets the output level.

MultibandExpander

This plug-in allows a signal to be split into four frequency bands. You can reduce the output level

in relation to the input level for signals below the set threshold for each band. This is useful if you

want to enhance the dynamic range or reduce the noise in quiet passages.

Cubase LE Cubase AI Cubase

Elements

Cubase

Artist

Cubase

Pro

Nuendo

Included with – – – – X X

Side-chain

support

– – – – X X