9.5

Table Of Contents

Included Effect Plug-ins

Dynamics Plug-ins

Hold Mode

Sets the Hold Mode.

● In Note-On mode, the gate only remains open for the time set with the Hold

and Release parameters, regardless of the length of the MIDI note that

triggered the gate.

● In Note-Off mode, the gate remains open for as long as the MIDI note plays.

The Hold and Release parameters are applied once a note-off signal has been

received.

Setting Up MIDI Gate

To use MIDI Gate for your audio, you need an audio track and a MIDI track.

PROCEDURE

1. Select the audio track to which you want to apply MIDI Gate.

This can be recorded or realtime audio material from any audio track.

2. Select MIDI Gate as an insert effect for the audio track.

3. Select a MIDI track to control the MIDI Gate effect.

You can either play notes on a connected MIDI keyboard or use recorded MIDI notes.

4. Open the Output Routing pop-up menu for the MIDI track and select MIDI Gate.

Applying MIDI Gate

PREREQUISITE

Set up the plug-in properly.

How to apply MIDI Gate depends on whether you are using realtime or recorded MIDI. We

assume for the purposes of this manual that you are using recorded audio and play the MIDI in

realtime.

PROCEDURE

1. If you use realtime MIDI to trigger the plug-in, make sure the MIDI track is selected.

2. Start playback.

3. If you use realtime MIDI, play a few notes on your keyboard.

RESULT

The MIDI notes trigger the Gate. The plug-in gates the audio signals.