9.5

Included Effect Plug-ins
Distortion Plug-ins
● To switch cabinets on the Cabinets page, click the model that you want to use. Select No
Cabinet if you only want to use the amps and effects.
● If you select Link Amplifier & Cabinet Choice, the plug-in automatically selects the
cabinet corresponding to the selected amp model.
Microphones
On the Microphones page, you can choose between different microphone types.
57
Dynamic microphone with cardioid pickup pattern.
121
Ribbon microphone with figure-8 pattern.
409
Dynamic microphone with supercardioid pickup pattern.
421
Dynamic microphone with cardioid polar pattern.
545
Dynamic microphone with cardioid pattern that minimizes feedback.
5
Dynamic microphone with cardioid pickup pattern.
30
Reference and measurement microphone with omni directional polar pattern.
87
Condenser microphone with omni directional pattern.
You can choose between different microphone positions. These positions result from two
different angles (on axis and off axis) and three different distances from the cabinet.
You can crossfade between the characteristics of the two microphones.
● To select one of the microphone types or blend between the two types, turn the Mix
control between the two microphones.
● To select a microphone position, click the corresponding ball in front of the cabinet. The
selected position is marked in red.
● To determine the ratio between line and mic, turn the Mix control on the left of the
cabinet.
NOTE
To scroll through microphones, use the mouse wheel when hovering over a microphone.
Master
Use the Master page to fine-tune the sound.
Input/Output Level Meters
The input and output level meters on the left and the right of the Master section
show the signal level of your audio. The rectangle on the input meter indicates the
optimum incoming level range. In all other views, the input and output levels are
indicated by two LEDs at the top left and right.
Using the Master Controls
30