9.5

Included VST Instruments
Prologue
12 dB HP
A high-pass filter cuts out the lower frequencies and lets the high frequencies pass.
This high-pass filter has a 12 dB/octave slope, producing a bright and thin sound.
24 dB HP
This filter has a 24 dB/octave slope, producing a bright and sharp sound.
Master Volume and Pan
The master Volume knob controls the master volume (amplitude) of the instrument. By default,
this parameter is controlled by Envelope 1, to generate an amplitude envelope for the oscillators.
The Pan knob controls the position of the instrument in the stereo spectrum. You can use Pan as
a modulation destination.
Modulation and Controllers
The lower half of the control panel displays the various modulation and controller assignment
pages available, as well as the EFX page. You switch between these pages using the buttons
above this section.
The following pages are available:
● The LFO page has two low frequency oscillators (LFOs) for modulating parameters.
● The ENV page contains the four envelope generators that can be assigned to control
parameters.
● The Event page contains the common MIDI controllers (Mod wheel, Aftertouch, etc.) and
their assignments.
● The EFX page offers three separate effect types: Distortion, Delay, and Modulation.
RELATED LINKS
Envelope Page on page 196
Event Page on page 198
Effects (EFX) Page on page 199
LFO Page
The LFO page is opened by clicking the LFO button at the top of the lower half of the control
panel. The page contains all parameters and the modulation and velocity destinations for two
independent LFOs.
Depending on the selected preset, there may already be modulation destinations assigned, in
which case these are listed in the Mod Dest box for each LFO.
209