9.5

Included VST Instruments
Mystic
Filter
Sets the crossover frequency of the distortion filter. The distortion filter consists of
a low-pass filter and a high-pass filter with a cutoff frequency equal to the crossover
frequency.
Tone
Controls the relative amount of low-pass and high-pass filtered signal.
Level
Controls the output level of the effect.
Delay
You can choose between 3 basic delay characteristics:
● Stereo Delay has two separate delay lines panned left and right.
● In Mono Delay, the two delay lines are connected in series for monophonic dual tap delay
effects.
● In Cross Delay, the delayed sound bounces between the stereo channels.
Song Sync
Activates/Deactivates tempo sync of the delay times.
Delay 1
Sets the delay time ranging from 0 ms to 728 ms. If MIDI sync is activated, the range
is from 1/32 to 1/1; straight, triplet or dotted.
Delay 2
Same as Delay 1.
Feedback
Controls the decay of the delays. With higher settings, the echoes repeat longer.
Filter
A low-pass filter is built into the feedback loop of the delay. This parameter controls
the cutoff frequency of this feedback filter. Low settings result in successive echoes
sounding darker.
Level
Controls the output level of the effect.
Modulation
You can choose between 3 basic modulation characteristics:
● Phaser uses an 8-pole all-pass filter to produce the classic phasing effect.
● Flanger is composed of two independent delay lines with feedback for the left and the
right channel. The delay time of both delays is modulated by one LFO with adjustable
frequency.
● Chorus produces a rich chorus effect with 4 delays modulated by four independent LFOs.
Song Sync
Activates/Deactivates tempo sync of the Rate parameter.
Rate
Sets the rate of the LFOs modulating the delay time. If Song Sync is activated, the
rate is synchronized to various beat increments.
Depth
Controls the depth of the delay time modulation.
200