9.5

MIDI Effects
Track Control
● Clicking the Off button sets all controls to their lowest value, without sending out any MIDI
messages.
● Clicking the Reset button resets all parameters to their default values, and sends out the
corresponding MIDI messages.
GS 1
The following controls are available if the GS 1 Controls mode is selected:
Send 1
Send level for the reverb effect.
Send 2
Send level for the chorus effect.
Send 3
Send level for the variation effect.
Attack
Adjusts the attack time of the sound. Lowering the value shortens the attack, while
raising it makes the attack time longer.
Decay
Adjusts the decay time of the sound. Lowering the value shortens the decay, while
raising it makes the decay longer.
Release
Adjusts the release time of the sound. Lowering the value shortens the release, while
raising it makes the release time longer.
Cutoff
Adjusts the filter cutoff frequency.
Resonance
Sets the sound characteristic of the filter. With higher values, a ringing sound is
heard.
Express
Allows you to send out expression pedal messages on the track’s MIDI channel.
Ch. Press
Allows you to send out aftertouch (channel pressure) messages on the track’s MIDI
channel. This is useful if your keyboard cannot send aftertouch, but you have sound
modules that respond to aftertouch.
Breath
Allows you to send breath control messages on the track’s MIDI channel.
Modul.
Allows you to send modulation messages on the track’s MIDI channel.
XG 1
The following controls are available if the XG 1 mode is selected.
Send 1
Send level for the reverb effect.
Send 2
Send level for the chorus effect.
173