9.5

Included Effect Plug-ins
Spatial + Panner Plug-ins
● LFE Low Pass Order
● LFE Low Pass Cutoff Frequency
● Output Gain.
NOTE
Upmix presets from the Cinema category are designed for the use with X-curve tuned speaker
systems. The other presets are designed for listening environments with a flat speaker tuning.
Input – Balance
Adjusts the balance of the input signal if the input signal is stereo or higher.
Upmix – Orig./Upmix
Adjusts the plug-in output between original and processed signal.
Direct Sound Stream Parameters
Divergence
Controls the strength of the center signal.
● At 0 % the mono components of the direct sound stream are distributed to the
center channel.
● At 100 % the mono components of the direct sound stream are distributed to
the front left and right channels.
Stage Width
Controls the position of the front channels to adjust the stereo base.
Dry/Wet
Controls the amount of ambience that remains in the direct sound stream after the
ambience extraction.
Ambient Sound Stream Parameters
Gain
Applies gain to the ambient sound stream to either emphasize (high gain) or dampen
(low gain) the amount of ambience in the mix.
Front/Rear
Adjusts the front/rear balance of the ambient sound stream.
Low Pass
Controls the ambient sound stream with a low-pass filter to prevent hissing.
Delay
Adds extra delay to the ambient sound stream to create the illusion of a very large
space.
Proximity
The Anymix Pro plug-in supports the Proximity surround format. Proximity allows you to take a
sound from the speakers and place it very close to the listener.
To make this effect audible, you need an appropriate reproduction device, for example, a
Proximity headphone system.
120