9.0

Table Of Contents

Controlling Sample Playback with Sampler Tracks(Cubase Elements only)

Sampler Control

345

NOTE

•

Audio samples that you load into Sampler Control are not copied to the project audio

folder. If you want to archive or share your project including all audio samples that you

have loaded into Sampler Control, you must create a self-contained project.

•

In the Pool, all audio samples that you have loaded into Sampler Control are listed in a

dedicated sampler track subfolder in the main audio folder.

RELATED LINKS

Creating Self-Contained Projects on page 76

Pool on page 358

Sampler Control

If the sampler track is selected, Sampler Control is available in the lower zone of the Project

window. Sampler Control allows you to view, edit, and play back samples or specific sections

of the samples.

1. Toolbar

Contains tools that allow you to select and edit the audio sample, to organize track

presets, and to transfer the sample with its settings to an instrument.

2. Waveform display/Envelope editor

Shows the waveform image of the sample and allows you to define the playback range

for the sample and to set a loop.

If the envelope editors for the pitch, filter, or amp section are shown, you can adjust

their envelope curve settings here.

3. Sound parameter section

Allows you to make settings for time stretching and formant shifting (AudioWarp

section), tuning and pitch modulation (Pitch section), filtering (Filter section), or level

and panorama (Amp section).

4. Keyboard section

Allows you to set the key range of the sample, its root key, and the modulation range of

the pitchbend wheel. These settings are used if you work with an external MIDI device.