9.0

Table Of Contents
Audio Effects
Send Effects
276
4. On the send slot, click Activate/Deactivate Send.
RESULT
The audio is routed through the FX channel.
AFTER COMPLETING THIS TASK
In the Channel Settings window for the audio channel you can hold down Alt and double-
click to show the send destination. If you have routed the send to an FX channel, the effect
control panel is opened.
RELATED LINKS
Adding FX Channel Tracks on page 274
Pre/Post Fader Sends(Cubase Elements only)
You can send the signal from the audio channel to the FX channel before or after the audio
channel volume fader.
Pre-fader sends
The audio channel signal is sent to the FX channel before the audio channel volume
fader.
Post-fader sends
The audio channel signal is sent to the FX channel after the audio channel volume
fader.