9.0

Audio Effects
Insert Effects
270
RESULT
The selected insert effect is loaded and activated, and the audio is routed through it. The
effect control panel is opened.
RELATED LINKS
Effect Control Panel on page 278
Adding Insert Effects to Busses
If you add insert effects to input busses, the effects become a permanent part of the
recorded audio file. If you add insert effects to output busses, all audio routed to that bus is
affected. Insert effects that are added to output busses are sometimes referred to as master
effects.
PROCEDURE
1. Select Devices> MixConsole to open the MixConsole.
2. In the fader section, perform one of the following actions:
•
Locate the input channel and click Edit Channel Settings to edit the input bus.
•
Locate the output channel and click Edit Channel Settings to edit the output bus.
The Channel Settings window for the selected channel opens.
3. In the Inserts section, click the first insert slot on the Inserts tab, and select an effect
from the selector.
RESULT
The selected insert effect is added to the bus and activated. The effect control panel is
opened.
Adding Insert Effects to Group Channels
If you add insert effects to group channels you can process several audio tracks through the
same effect.
PROCEDURE
1. Select Project> Add Track> Group Channel to add a group channel track.
2. In the Inspector for the group track, open the Output Routing pop-up menu and select
the desired output bus.
3. In the Inspector for the group track, open the Inserts section.
4. Click the first effect slot and select an effect from the selector.
5. In the Inspector for the audio tracks, open the Output Routing pop-up menus and
select the group.