9.0

Markers
Marker Track
228
2. Open the Functions pop-up menu and select either Reassign Position Marker IDs or
Reassign Cycle Marker IDs.
RESULT
The marker IDs of the selected type are reassigned to match the order of markers on the
marker track.
Marker Track
A marker track is used for adding and editing markers.
1. Add Marker
Adds a position marker at the cursor position.
2. Add Cycle Marker
Adds a cycle marker at the cursor position.
3. Locate pop-up menu
If you select a position or a cycle marker in this pop-up menu, the corresponding
marker in the event display or in the Markers window is selected.
4. Cycle pop-up menu
If you select a cycle marker in this pop-up menu, the left and right locators are set to
the corresponding cycle marker.
5. Zoom pop-up menu
If you select a cycle marker in this pop-up menu, the view zooms to the corresponding
cycle marker.
6. Marker event (inactive)
Shows an inactive marker event.
7. Marker event (active)
Shows an active marker event.
8. Cycle marker event (inactive)
Shows an inactive cycle marker event.
9. Cycle marker event (active)
Shows an active cycle marker event.
Adding, Moving, and Removing the Marker Track
•
To add a marker track to the project, select Project> Add Track> Marker.
•
To move a marker track to another position in the track list, click and drag it up or
down.
•
To remove the marker track, right-click it in the track list and select Remove Selected
Tracks.
•
To remove an empty marker track, select Project> Remove Empty Tracks.
This also removes any other tracks that are empty.