10.0

Table Of Contents

Decreasing Stepwise

Steps through the available settings in reverse order until the minimum is reached.

Increasing Stepwise (cycle)

Steps through the available settings, starting over with the minimum value when the

maximum is reached.

Decreasing Stepwise (cycle)

Steps through the available settings in reverse order, starting over with the

maximum value when the minimum is reached.

Smart Switch

Switches between 2 states every time you press the switch. Enters Momentary mode

if you hold the switch.

Invert Control Value

Inverts the control state/value.

Hide When Inactive

Hides plug-in parameters when they are inactive or disabled.

Assigning Parameters to Controls

PROCEDURE

1. On the Remote Control Editor toolbar, click Activate/Deactivate Learn Mode.

2. Select the control that you want to assign to a plug-in parameter.

3. Do one of the following:

● Click a parameter on the plug-in panel.

● Double-click on a control in the Remote Control Editor, and select a parameter

from the list of available plug-in parameters.

4. Press Esc to end Learn mode.

RESULT

The parameter is assigned to the control.

NOTE

To remove the parameter assignment for a cell, activate Learn mode, select the cell, and press

Delete or Backspace.