10.0

Creating MIDI Notes
You can create MIDI notes from hitpoints. This allows you to double, replace, or enrich drum hits
by triggering sounds of a VST instrument.
PREREQUISITE
The audio event from which you want to create MIDI notes is opened in the Sample Editor, and
the hitpoints are set at the correct positions.
PROCEDURE
1. In the Hitpoints section in the Inspector, click Create MIDI Notes.
2. In the Convert Hitpoints to MIDI Notes dialog, set up the parameters.
3. Click OK.
RESULT
A MIDI track is added to your project, and MIDI notes are created at every hitpoint position.
AFTER COMPLETING THIS TASK
Assign a VST instrument to the MIDI track, and select a sound to enrich the audio.
Convert Hitpoints to MIDI Notes Dialog
When creating MIDI notes from hitpoints, you can specify how hitpoints should be converted.
The following options are available:
Velocity Mode
Allows you to select a velocity mode:
● If you want the velocity values of the created MIDI notes to vary according to
the peak levels of the corresponding hitpoints, select Dynamic Velocity.
● If you want to assign the same velocity value to all created MIDI notes, select
Fixed Velocity.
Velocity
Sets the Fixed Velocity.
Pitch
Sets a note pitch for all created MIDI notes.
Length
Sets a note length for all created MIDI notes.
Destination
Allows you to select a destination:
Hitpoints
Creating MIDI Notes
362