10.0

Bypassing Send Effects
● To bypass all sends, click the bypass button at the top of the Sends rack.
● To deactivate bypass, click the button again.
Adding FX Channels to a Send
PROCEDURE
1. Right-click on the send slot to open the context menu.
2. Select Add FX Channel to <send name>.
3. In the Add FX Channel Track window, select the effect and conguration.
4. Click OK.
RESULT
The FX channel track is added in the Project window, and the send is automatically routed to it.
Adding Notes to a MixConsole Channel
PROCEDURE
1. On the MixConsole toolbar, click Set up Window Layout, and activate Notepads.
The Notepads section is shown above the fader section.
2. Select the channel for which you want to add notes, click in the notepad section and enter
your notes.
3. To close the notepad, press Esc, or click in another section of the MixConsole.
Channel Latency Overview
The Channel Latencies display the latencies caused by insert effects or channel strip modules
for audio-related channels in the MixConsole.
● To show the channel latency display in the fader section of the MixConsole, click Set up
Window Layout on the toolbar and activate Channel Latencies.
● To open an overview of the latencies for a specic channel, click Open Channel Latency
Overview.
The Channel Latency Overview shows the following information:
Name
The name of the effect that causes the latency.
MixConsole
MixConsole Window
284