10.0

assign key commands to the rst 8 congurations in the Channel & Track Visibility
category of the Key Commands dialog.
Saving Congurations
To quickly switch between different channel setups, you can save congurations. The
congurations contain visibility settings as well as the show/hide status of channel types and
racks.
PROCEDURE
1. Set up the conguration that you want to save.
2. On the toolbar, click Channel Visibility Congurations.
3. From the pop-up menu, select Add Conguration.
4. In the Add Conguration dialog, enter a name for the conguration.
5. Click OK.
RESULT
The conguration is saved and you can return to it at any time.
Rack Selector
The rack selector allows you to activate specic MixConsole functions that are organized in
racks, such as routing, insert, or send handling.
Channel Racks Selector
You can activate and deactivate the different channel racks in the MixConsole.
● To open the rack selector, click Select Rack Types on the MixConsole toolbar.
Depending on the channel type, you can activate/deactivate the following racks:
Hardware
Allows you to control your audio hardware effects. This rack is only available if
supported by your hardware.
Routing
Allows you to set up the input and output routing. For MIDI, you can also select the
MIDI channel.
Pre (Filters/Gain/Phase) (Cubase Elements only)
Contains input lter controls along with Phase and Gain controls for audio-related
channels.
Inserts
Allows you to select insert effects for your channel.
Equalizers (audio-related channels only)
Allows you to set the channel EQ.
Channel Strip (audio-related channels only)
Allows you to integrate channel strip modules, such as Gate, Compressor, EQ,
Transformer, Saturator, and Limiter that allow you to enhance your sound.
Sends
Allows you to select send effects for your channel.
MixConsole
MixConsole Window
261