10.0

RELATED LINKS
Setting the Default Output Bus (Main Mix) on page 23
Bus Congurations
After you have set up all the required busses for a project you can edit the names and change
port assignments. The bus conguration is saved with the project.
Removing Busses
PROCEDURE
● In the Audio Connections window, right-click a bus in the list and select Remove Bus.
You can also select the bus and press Backspace.
Changing Port Assignments
You can change the port assignment of busses.
PROCEDURE
1. Select Studio > Audio Connections.
2. Do one of the following:
● To change the assignment of a single bus, open the Device Port pop-up menu, and
select a new port.
● To assign subsequent busses to several selected busses, open the Device Port pop-
up menu for the rst selected entry, press Shift, and select a device port.
● To assign the same port to several selected busses, open the Device Port pop-up
menu for the rst selected entry, press Shift-Alt, and select a device port.
Renaming Multiple Busses
You can rename all the selected busses at once using incrementing numbers or letters.
PROCEDURE
1. Select Studio > Audio Connections.
2. Select the busses that you want to rename.
3. Do one of the following:
● Enter a new name for one of the busses, followed by a number.
●
Enter a new name for one of the busses, followed by a space and a capital letter.
4. Press Return.
RESULT
The busses are renamed automatically using either incrementing numbers or letters.
NOTE
The renaming starts from the bus where you edit the name until the bottom, and then continues
from the top until all selected busses have been renamed.
Audio Connections
Bus Congurations
25