10.0

Table Of Contents

1 Beat

Jumps to the next section at the next beat.

End

Plays the current section to the end, then jumps to the next section.

Arranging Music to Video

When you compose music for video, you can use arranger events to ll a specic video section

with music. The following is an example on how you could do that.

PREREQUISITE

You have connected and set up an external sync master device to your computer. You have

created a new, empty project and added a MIDI track.

PROCEDURE

1. Create a MIDI part that starts at position 00:00:00:00 and ends at position 00:01:00:00.

2. Create a MIDI part that starts at position 00:01:00:00 and ends at position 00:02:00:00.

3. Create a MIDI part that starts at position 00:02:00:00 and ends at position 00:03:00:00.

4. On the Transport panel, activate Sync.

5. In the global track controls area of the track list, click Add Other Track or Use Track

Preset .

6. Select Add Arranger Track.

7. Add arranger events at the positions of the MIDI parts.

8. Set up the arranger chain A-A-B-B-C-C.

9. Activate Arranger mode and click Play.

10. On your external sync master device, start external timecode at position 00:00:10:00.

In your project, the position 00:00:10:00 is located, and arranger part A is played back.

11. Start your external sync master device at a position that does not match the project start

time, for example, 00:01:10:00.

In your project, the position 00:01:10:00 is located, and arranger part A is played back.

RESULT

If you position the external sync master device to a position that does not match the project start

time, Cubase automatically jumps to the right position in the arranger track.

NOTE

The reference for the external timecode can be MIDI or any other timecode that can be

interpreted by Cubase.