10.0

Table Of Contents

Orig. Position

Sets the original starting position of the quantized material as starting point of the

quantizing. This allows you to synchronize material that does not start from bar 1 of

the project.

Randomize

Allows you to set a distance in ticks so that your audio or MIDI is quantized to

random positions within the specied distance from the quantize grid. This allows for

slight variations and, at the same time, prevents your audio or MIDI from ending up

too far away from the grid.

iQ Mode

Applies a loose quantization so that your audio or MIDI moves only part of the way

to the closest quantize grid position. The Iterative Strength value to the right

determines how close your audio or MIDI moves towards the grid.

NOTE

Iterative quantizing is based on the current, quantized positions and not on the

original event positions. You can repeatedly use the iQ mode to gradually move your

audio or MIDI closer to the quantize grid until you have found the right timing.

MIDI CC

Moves controllers related to MIDI notes (pitchbend, etc.) automatically with the notes

when these are quantized.

Reset Quantize

Resets your audio or MIDI to its original, unquantized state.

IMPORTANT

This function has no effect on an event that was moved manually.

Auto

Applies any changes immediately to the selected parts or events. A way of using this

feature is to set up a playback loop and adjust the settings until you are satised with

the result.

Quantize

Applies your settings.