10.0

4. Click OK.
Setting up All MIDI Inputs
When you record MIDI, you can specify which MIDI input each recording MIDI track should use.
However, you can also record any MIDI data from any MIDI input. You can specify which inputs
are included when you select
All MIDI Inputs for a MIDI track.
PROCEDURE
1. Select Studio > Studio Setup.
2. In the Devices list, select MIDI Port Setup.
3. Activate In ‘All MIDI Inputs’ for a port.
NOTE
If you have a MIDI remote control unit connected, make sure to deactivate the In ‘All MIDI
Inputs’ option for that MIDI input. This avoids accidental recording of data from the
remote control when
All MIDI Inputs is selected as input for a MIDI track.
4. Click OK.
RESULT
When you select All MIDI Inputs on the Input Routing menu of a MIDI track in the Inspector,
the MIDI track uses all MIDI inputs that you specied in the MIDI Port Setup.
MIDI Port Setup Page
The MIDI Port Setup page in the Studio Setup dialog displays the connected MIDI devices and
allows you to set up their ports.
● To open the MIDI Port Setup page, select Studio > Studio Setup and activate MIDI Port
Setup in the Devices list.
Setting up Your System
Setting up MIDI
18