9.5

Controlling Sample Playback with Sampler Tracks(Cubase Elements only)
Transferring Samples from Sampler Control to VST Instruments
RESULT
If Fixed Pitch is deactivated, the sample is played back and the pitch is defined by the notes you
play. If you hit lower keys, the sample is played back with a low pitch. If you hit higher keys, the
sample is played back with a high pitch.
If Fixed Pitch is activated, the sample is played back in its original pitch.
AFTER COMPLETING THIS TASK
To use the sound of the edited sample in your project, create or record a MIDI event on the
sampler track.
RELATED LINKS
On-Screen Keyboard on page 166
Monitoring via Cubase on page 171
MIDI Events on page 128
Basic Recording Methods on page 168
MIDI Editors on page 456
Transferring Samples from Sampler Control to VST
Instruments
You can transfer audio samples with all settings that you have made in Sampler Control to
specific Steinberg VST instruments.
Transferring audio samples from Sampler Control to a VST instrument creates a new instrument
track in the track list. This new track is added below the sampler track. The audio sample and all
its settings are loaded in the VST instrument.
You can transfer audio samples from Sampler Control to the following Steinberg VST
instruments:
●
Groove Agent
●
Groove Agent SE
●
HALion
Transferring a Sample
PREREQUISITE
You have installed Groove Agent, Groove Agent SE, or HALion. You have loaded an audio sample
in Sampler Control.
PROCEDURE
1. In the Sampler Control toolbar, click Transfer to New Instrument.
2. In the pop-up menu, select the instrument to which you want to transfer the sample.
RESULT
In the track list, a new instrument track is created below the sampler track. The instrument track
has the same name as the sampler track. The audio sample and all its settings are loaded in the
selected VST instrument.
RELATED LINKS
Transferring a Sample on page 347
347