9.5

Audio Effects
Insert Effects
3. In the Inspector for the group track, open the Inserts section.
4. Click the first effect slot and select an effect from the selector.
5. In the Inspector for the audio tracks, open the Output Routing pop-up menus and select
the group.
RESULT
The signal from the audio track is routed through the group channel and passes through the
insert effect.
Copying Insert Effects
You can add insert effects to audio channels by copying them from other audio channels or from
other slots of the same audio channel.
PREREQUISITE
You have added at least one insert effect to an audio channel.
PROCEDURE
1. Select Studio> MixConsole.
2. In the Inserts rack, locate the insert effect that you want to copy.
3. Hold down Alt, drag the insert effect, and drop it on an insert slot.
RESULT
The insert effect is copied. If the destination slot already contains an insert effect, it is replaced.
Rearranging Insert Effects
You can change the position of an insert effect in the signal chain of the audio channel by moving
it to a different slot of the same channel. You can also move an insert effect to another audio
channel.
PREREQUISITE
You have added at least one insert effect to an audio channel.
PROCEDURE
1. Select Studio> MixConsole.
2. In the Inserts rack, locate the insert effect that you want to rearrange.
3. Drag the insert effect and drop it on an insert slot.
RESULT
The insert effect is removed from the source slot and placed on the destination slot. If the
destination slot already contains an insert effect, this effect is moved to the next insert slot.
Deactivating Insert Effects
If you want to listen to a track without having it processed by an effect, but do not want to
remove this effect completely from the insert slot, you can deactivate it.
PREREQUISITE
You have added an insert effect to an audio channel.
265