9.5

Setting Up Your System
Setting Up MIDI
your own playing, edit the MIDI data in Cubase, and then play it back on the keyboard and record
the audio that is coming out of the keyboard for a better edited performance.
Showing or Hiding MIDI Ports
You can specify if a MIDI port is listed on the MIDI pop-up menus in the program.
PROCEDURE
1. Select Studio> Studio Setup.
2. In the Devices list, select MIDI Port Setup.
3. To hide a MIDI port, deactivate its Visible column.
4. Click OK.
Setting Up All MIDI Inputs
When you record MIDI, you can specify which MIDI input each recording MIDI track should use.
However, you can also record any MIDI data from any MIDI input. You can specify which inputs
are included when you select All MIDI Inputs for a MIDI track.
PROCEDURE
1. Select Studio> Studio Setup.
2. In the Devices list, select MIDI Port Setup.
3. Activate In ‘All MIDI Inputs’ for a port.
NOTE
If you have a MIDI remote control unit connected, make sure to deactivate the In ‘All
MIDI Inputs’ option for that MIDI input. This avoids accidental recording of data from the
remote control when All MIDI Inputs is selected as input for a MIDI track.
4. Click OK.
RESULT
When you select All MIDI Inputs on the Input Routing menu of a MIDI track in the Inspector,
the MIDI track uses all MIDI inputs that you specified in the MIDI Port Setup.
MIDI Port Setup
The MIDI Port Setup page in the Studio Setup dialog displays the connected MIDI devices and
allows you to set up their ports.
● To open the MIDI Port Setup page, select Studio> Studio Setup and activate MIDI Port
Setup in the Devices list.
18