9.5

Recording
Audio Recording Specifics
3. Select Set Record Folder.
4. In the file dialog, navigate to the folder that you want to use as record folder or create a
new folder by clicking New Folder.
If you want to have separate folders for different types of material (speech, ambient
sounds, music, etc.), you can create subfolders within the project Audio folder and assign
different tracks to different subfolders. This way, all audio files will still reside within the
project folder, which will make managing the project easier.
Getting the Track Ready for Recording
Creating a Track and Setting the Channel Configuration
PROCEDURE
1. Select Project> Add Track> Audio.
2. In the Count field, enter the number of tracks that you want to add.
3. Open the Configuration pop-up menu and select a channel configuration.
4. Optional: Enter a track name.
5. Click Add Track.
RELATED LINKS
Add Track Dialog on page 109
RAM Requirements for Recording
Each track on which you record requires a certain amount of RAM, and the memory usage
increases the longer the recording lasts. For each audio channel, 2.4 MB of RAM are required
for MixConsole settings, etc. The memory usage increases with the length of the recording, the
sample rate, and the number of tracks you record. Consider the RAM limitation of your operating
system when setting up your project for recording.
Selecting an Input Bus for the Track
Before you can record on your track, you must add and set up the required input busses and
specify from which input bus the track will record.
PROCEDURE
1. In the Inspector for the audio track, open the Input Routing pop-up menu.
2. Select an input bus.
RELATED LINKS
Setting Up Input and Output Ports on page 16
Audio Bus Setup on page 17
174