9.0

Table Of Contents

Included Effect Plug-ins

Filter Plug-ins

Cubase

Elements

Cubase

Artist

Cubase

Pro

Nuendo NEK

Side-chain

support

– – – X X X –

You can independently specify the frequency, width, and the gain for the Lo and Hi Pedal

positions. The crossover point between the Lo and Hi Pedal positions lies at 50.

WahWah Parameters

Pedal

Controls the filter frequency sweep.

Pedal Control (MIDI)

Allows you to choose the MIDI controller that controls the plug-in. Set this to

Automation if you do not want to use MIDI realtime control.

Freq Lo/Hi

Set the frequency of the filter for the Lo and Hi pedal positions.

Width Lo/Hi

Set the width (resonance) of the filter for the Lo and Hi pedal positions.

Gain Lo/Hi

Set the gain of the filter for the Lo and Hi pedal positions.

Filter Slope selector

Allows you to choose between two filter slope values: 6

dB or 12

dB.

NOTE

If side-chaining is supported, the Pedal parameter can also be controlled from another

signal source via the side-chain input. The louder the signal, the more the filter frequency is

raised so that the plug-in acts as an auto-wah effect. For a description of how to set up side-

chain routing, see the Operation Manual.

MIDI Control

For realtime MIDI control of the Pedal parameter, MIDI must be directed to the WahWah

plug-in.

If WahWah is used as an insert effect (for an audio track or an FX channel), it is available on

the Output Routing pop-up menu for MIDI tracks.