9.0

Table Of Contents

Included Effect Plug-ins

EQ Plug-ins

Resonant

Applies serial filters where a gain increase of one band lowers the gain in

adjacent bands.

StudioEQ

Studio EQ is a high-quality 4-band parametric stereo equalizer with two fully parametric

mid-range bands. The low and high bands can act as either shelving filters (three types), or

as peak filter (band-pass), or as cut filter (low-pass/high-pass).

Cubase

Elements

Cubase

Artist

Cubase

Pro

Nuendo NEK

Included with – – X X X X –

Gain (-20 to +24

dB)

Sets the amount of attenuation/boost for the corresponding band.

Inv

Inverts the gain value of the filter. Use this button to filter out unwanted noise.

When looking for the frequency to omit, it sometimes helps to boost it in the first

place (set the filter to positive gain). After you have found the frequency of the

noise, you can use the Inv button to cancel it out.

Freq (20 to 20000

Hz)

Sets the frequency of the corresponding band. You can set the frequency either

in Hz or as a note value. If you enter a note value, the frequency is automatically

changed to Hz. For example, a note value of A3 sets the frequency to 440

Hz.

When you enter a note value, you can also enter a cent offset. For example, enter

A5 -23 or C4 +49.

NOTE

Ensure that you enter a space between the note and the cent offset. Only in this

case, the cent offsets are taken into account.