9.0

Included Effect Plug-ins
Dynamics Plug-ins
Frequency Band Editor
The frequency band editor in the upper half of the panel is where you set the width of the
frequency bands as well as their level. The vertical value scale to the left shows the gain
level of each frequency band. The horizontal scale shows the available frequency range.
• To define the frequency range of the different frequency bands, use the handles at the
sides of each frequency band.
• To attenuate or boost the gain of the frequency band, use the handles at the top of each
frequency band.
Live
If this button is activated, the look-ahead feature of the effect is deactivated.
Look-ahead produces more accurate processing, but adds a specific amount
of latency as a trade-off. If Live mode is activated, there is no latency, which is
better for live processing.
Bypassing Frequency Bands
To bypass each frequency band, activate the Bypass Band button in each
section.
Soloing Frequency Bands
To solo a frequency band, activate the S button in each section. Only one band can
be soloed at a time.
54