9.0

Table Of Contents

Included Effect Plug-ins

Dynamics Plug-ins

Note To Attack

Determines to which extent the velocity values of the MIDI notes affect the attack

time. The higher the value, the more the attack time increases with high note

velocities. Negative values result in shorter attack times with high velocities. If

you do not want to use this parameter, set it to 0.

Note To Release

Determines to which extent the velocity values of the MIDI notes affect the

release time. The higher the value, the more the release time increases. If you do

not want to use this parameter, set it to 0.

Velocity To VCA

Controls to which extent the velocity values of the MIDI notes determine the

output volume. At a value of 127, the volume is controlled entirely by the velocity

values, and at a value of 0, the velocities have no effect on the volume.

Hold Mode

Sets the Hold Mode.

• In Note-On mode, the gate only remains open for the time set with the Hold

and Release parameters, regardless of the length of the MIDI note that

triggered the gate.

• In Note-Off mode, the gate remains open for as long as the MIDI note

plays. The Hold and Release parameters are applied once a note-off signal

has been received.

Setting Up MIDI Gate

To use MIDI Gate for your audio, you need an audio track and a MIDI track.

PROCEDURE

1. Select the audio track to which you want to apply MIDI Gate.

This can be recorded or realtime audio material from any audio track.

2. Select MIDI Gate as an insert effect for the audio track.

3. Select a MIDI track to control the MIDI Gate effect.

You can either play notes on a connected MIDI keyboard or use recorded MIDI notes.

4. Open the Output Routing pop-up menu for the MIDI track and select MIDI Gate.

Applying MIDI Gate

PREREQUISITE

Set up the plug-in properly.

How to apply MIDI Gate depends on whether you are using realtime or recorded MIDI. We

assume for the purposes of this manual that you are using recorded audio and play the MIDI

in realtime.

PROCEDURE

1. If you use realtime MIDI to trigger the plug-in, make sure the MIDI track is selected.