9.0

Included VST Instruments
Spector
6 Osc 1:2:3
Three groups of two oscillators with the pitch ratio 1:2:3 (2 oscillators with base
pitch, 2 oscillators at half the frequency of the base pitch, and 2 oscillators at a
third of the frequency).
6 Osc 1:2:3:4:5:6
6 oscillators tuned with the pitch ratio 1:2:3:4:5:6 (known as the subharmonic
series).
4 Osc 1:2
2 oscillators with base pitch and 2 pitched one octave down.
3 Osc
3 oscillators with the same pitch.
2 Osc
2 oscillators with the same pitch.
2 Osc 1:2
One oscillator with base pitch and one pitched one octave down.
1 Osc
A single oscillator. In this mode, the Detune and Cut II parameters are not active.
Detune
Detunes the oscillators. Low values give gentle chorus-like detuning. Raising the control
detunes the oscillators by several semitones for special effects.
Raster
Reduces the number of harmonics present in the oscillator waveforms in the following
manner:
• If 0 is selected, all harmonics are present.
• If 1 is selected, only every second harmonic is present.
• If 2 is selected, only every third harmonic is present.
And so on.
Portamento
This parameter makes the pitch glide between the notes you play. The parameter setting
determines the time it takes for the pitch to glide from one note to the next. Turn the knob
clockwise for longer glide time.
The Mode switch allows you to apply glide only if you play a legato note. Legato mode only
works with monophonic parts.
241