9.0

Included VST Instruments
LoopMash
• If sync is deactivated, the current LoopMash tempo (in BPM) is displayed in the tempo
field to the left of the master button. To change the local tempo, click in the tempo
field, enter a new value, and press Enter.
• If sync is deactivated, you can click the master button (to the right of the tempo field) to
copy the tempo of the current master loop into the tempo field.
The sync on/off parameter can be automated. This is useful to control LoopMash in a
project – with sync off, the playback of LoopMash within a project is paused.
Controlling Transport Functions with Your MIDI Keyboard
You can control the start, stop, sync on, and sync off functions with your MIDI keyboard.
C2
Start
D2
Stop
E2
Sync on
F2
Sync off
NOTE
If you do not have a MIDI keyboard connected to your computer, you can use the virtual
keyboard (see the Operation Manual).
Storing Your Configuration as Scenes
On the Slice Selection and the Audio Parameters pages, you find a row of 24 pads. For each
of these pads, you can save one scene, that is, a combination of up to eight tracks with all
parameter settings. By triggering the pads, you can quickly change between different scenes
during your performance.
1. Save scene
2. Remove scene
3. Jump interval
4. Selected scene
5. Pad with associated scene
6. Empty scene pad
• To save the current settings as a scene, click the round button and then a pad. This
saves your setup to that pad.
203