9.0

MIDI Effects
Track Control
settings. If your instrument is compatible with GS or XG, the Track Controls effect allows you
to adjust sounds and effects in your instrument from within your host application.
The Available Control Panels
You select the control panel from the pop-up menu at the top of the effect panel. The
following panels are available:
GS 1
Contains effect sends and various sound control parameters for use with
instruments compatible with the Roland GS standard.
XG 1
Contains effect sends and various sound control parameters for use with
instruments compatible with the Yamaha XG standard.
XG 2
Global settings for instruments compatible with the Yamaha XG standard.
About the Reset and Off Buttons
You find two buttons labeled Off and Reset at the top of the control panel:
• Clicking the Off button sets all controls to their lowest value, without sending out any
MIDI messages.
• Clicking the Reset button resets all parameters to their default values, and sends out
the corresponding MIDI messages.
GS 1
The following controls are available if the GS 1 Controls mode is selected:
Send 1
Send level for the reverb effect.
Send 2
Send level for the chorus effect.
Send 3
Send level for the variation effect.
Attack
Adjusts the attack time of the sound. Lowering the value shortens the attack,
while raising it makes the attack time longer.
Decay
Adjusts the decay time of the sound. Lowering the value shortens the decay,
while raising it makes the decay longer.
Release
Adjusts the release time of the sound. Lowering the value shortens the release,
while raising it makes the release time longer.
189