9.0

Included Effect Plug-ins
Distortion Plug-ins
• To attenuate or boost the output level of each frequency band by ±15 dB, use the
handles on top of each frequency band.
Global Settings
SB
Switches between multi band and single band mode.
Scenes
You can save up to 8 different settings. If the default setting of a scene is active,
the selected scene button lights up yellow.
If you change the default settings, the button lights up green, indicating that this
scene has customized settings.
To copy the settings of a scene to another scene, select the scene that you want
to copy, click Copy, and click one of the numbered buttons.
You can automate the selection of scenes.
Mix
Sets the level balance between the dry signal and the wet signal.
Output (-24 to 24 dB)
Sets the output level.
Band Settings
Mute
To mute each frequency band, activate the M button in each section.
Bypassing Frequency Bands
To bypass each frequency band, activate the Bypass Band button in each
section.
Soloing Frequency Bands
To solo a frequency band, activate the S button in each section. Only one band can
be soloed at a time.
In/Out meter
Display the input and output level.
Gate
Determines the level at which the gate is activated. Signal levels above the set
threshold trigger the gate to open, and signal levels below the set threshold close
the gate.
17