9.0

Included Effect Plug-ins
Tools Plug-ins
• If a string is out of tune (for example, if the pitch for the E string is shown as Eb), tune
the string so that the correct pitch is shown and the two arrows are in the middle.
Repeat this procedure for each string.
• To mute the output signal so that you can tune the strings in silence, activate the Mute
button at the bottom middle of the plug-in panel.
Digital View (Cubase Pro and Nuendo only)
Note
Displays the currently played pitch.
Cent
Displays the value, deviating from Note. A negative value indicates that the pitch
is flat. A positive value indicates that the pitch is sharp.
Strobe/Classic
You can switch the display between two modes: Strobe and Classic.
In Strobe mode, a blue indicator constantly runs from right to left, that is from
positive to negative. The more flat a note is, the faster the indicator moves. As
soon as you play a sharp tone, the running direction of the indicator runs from
left to right, that is from negative to positive. When you play the correct pitch, the
indicator stops and the display turns gray.
When you play a note in Classic mode, the pitch is shown in the middle of the
display. When you play the correct pitch, the middle of the indicator turns gray.
Base
Displays the frequency of the base note A. Its default value is 440 Hz. You can
adjust Base by ±15 Hz.
Octave
Displays the octave.
156