9.0

Included Effect Plug-ins
Tools Plug-ins
NOTE
Ensure that you enter a space between the note and the cent offset. Only in this
case, the cent offsets are taken into account.
Gain section
Allows you to set the amplitude of the signal. The higher the value, the stronger
the signal. You can select one of the preset values, or use the slider to set a value
between -81 and 0 dB.
Tuner
This is a guitar tuner.
IMPORTANT
Make sure that you deactivate any other effect that alters pitch, like chorus or vibrato.
Cubase
LE
Cubase
AI
Cubase
Elements
Cubase
Artist
Cubase
Pro
Nuendo NEK
Included with X X X X X X –
Simply connect a guitar or other instrument to an audio input and select Tuner as an insert
effect.
IMPORTANT
To use Tuner, you must activate Monitor for the track with Tuner.
You can display Tuner in an analog view or in a digital view.
• To switch between analog view and digital view, click the Switch between analog view
and digital view button in the upper left corner of the plug-in.
Analog View
When you play a note, the pitch is shown in the middle of the display. The frequency in Hz is
shown in the bottom left corner and the octave range in the bottom right corner.
The two arrows indicate any deviation in pitch. If the pitch is flat, they are positioned in the
left half of the display, if the pitch is sharp they are in the right half. The deviation is also
shown in the upper area of the display.
155