9.0

Included Effect Plug-ins
Tools Plug-ins
Frequency Spectrum Analyzer Mode (Freq.)
If Freq. is activated, MultiScope divides the frequency spectrum into separate vertical bands,
which allows you to get a visual overview of the different frequencies’ relative amplitude. The
frequency bands are shown from left to right, starting with the lower frequencies.
Channel menu
If the source signal is stereo, you can select the Left or Right channel for viewing,
or Stereo for both channels to be shown in the window.
If MultiScope is used with a multi-channel track or output bus, you can select any
speaker channel for viewing, or All Channels to view them all at once.
Freeze
Freezes the display.
Mode A/Mode B
Allow you to switch between different view modes. Mode A is more graphically
detailed, showing a solid, blue amplitude bar for each band. Mode B is less
detailed, showing a continuous blue line that displays the peak levels for each
band.
These view modes do not have any effect if you have set the Frequency knob to
Spectrum.
Amplitude
Allows you to increase/decrease the vertical range of the bands.
Frequency
Allows you to divide the frequency spectrum into 8, 15, or 31 bands, or you set it
to Spectrum, which gives you a high-resolution view.
150