9.0

Included Effect Plug-ins
Spatial + Panner Plug-ins
Proximity Input, Variable Output
Decodes the incoming Proximity signal and converts it to any standard output
configuration other than 5.1.
NOTE
Convert 8.0 and 8.1 tracks to 7.1 before you encode to 7.1 Proximity. This prevents errors in
the channel order.
Proximity FX Level
Provides the Proximity effect settings.
Maximum
Allows you to set the maximum Proximity effect level that is applied to the input
sources.
Distance Control
Allows you to select how the position of the input channels affects the effect
level.
You can select an attenuation curve from the pop-up menu:
• Off
Provides a constant effect level.
• Linear
The attenuation starts right from the center position and is applied linearly.
• Sinusoidal
The attenuation starts approximately at loudspeaker distance and
increases exponentially with distance.
• Elliptical
The attenuation starts at two thirds of the stage with an exponential
attenuation curve.
Reference
Allows you to select if the distance-based attenuation of the Proximity level
depends on the position of the center icon or on the position of each input
channel.
133