9.0

Included Effect Plug-ins
Spatial + Panner Plug-ins
• Ambience Delay.
Furthermore, the following parameters on the Advanced panel are affected by the preset:
• LFE Gain
• LFE Low Pass Enable
• LFE Low Pass Order
• LFE Low Pass Cutoff Frequency
• Output Gain.
NOTE
Upmix presets from the Cinema category are designed for the use with X-curve tuned
speaker systems. The other presets are designed for listening environments with a flat
speaker tuning.
Input – Balance
Adjusts the balance of the input signal if the input signal is stereo or higher.
Upmix – Orig./Upmix
Adjusts the plug-in output between original and processed signal.
Direct Sound Stream Parameters
Divergence
Controls the strength of the center signal.
• At 0 % the mono components of the direct sound stream are distributed to
the center channel.
• At 100 % the mono components of the direct sound stream are distributed
to the front left and right channels.
Stage Width
Controls the position of the front channels to adjust the stereo base.
Dry/Wet
Controls the amount of ambience that remains in the direct sound stream after
the ambience extraction.
Ambient Sound Stream Parameters
Gain
Applies gain to the ambient sound stream to either emphasize (high gain) or
dampen (low gain) the amount of ambience in the mix.
Front/Rear
Adjusts the front/rear balance of the ambient sound stream.
Low Pass
Controls the ambient sound stream with a low-pass filter to prevent hissing.
131