9.0

Included Effect Plug-ins
Reverb Plug-ins
Program
A REVerence program only contains the settings related to a single impulse
response. Programs are loaded and managed via the program matrix.
Presets
Presets are useful in the following situations:
• To save a complete setup with different impulse responses for later use (for example,
different setups for explosion sounds that can be reused for other scenes or movies).
• When you want to save different parameter sets for the same impulse response so that
you can later choose the set that best suits your needs.
Programs
Programs offer the following advantages:
• Up to 36 programs can be loaded into the program matrix for instant recall.
• A program provides a quick and easy way to save and recall the settings for a single
impulse response, allowing for short loading times.
• When automating a project and loading a REVerence program, only one automation
event is written.
If you load a plug-in preset instead (which contains a lot more settings than a
program), a lot of unnecessary automation data (for the settings that you did not use) is
written.
RELATED LINKS
Reverb Settings on page 113
EQ Settings on page 115
The Pictures Section on page 116
Custom Impulse Responses on page 117
Setting up Programs
PROCEDURE
1. In the program matrix, click on a program slot to select it.
A blinking white frame indicates that this program slot is selected.
2. Click the Browse button or click the empty slot again to load one of the included
programs.
You can also import a new impulse response file.
3. In the browser, select the program containing the impulse response that you want to
use and click OK.
The name of the loaded impulse response is shown in the upper left corner of the
REVerence panel.
4. Set up the REVerence parameters as and click the Store button to save the impulse
response with the current settings as a new program.
5. Set up as many programs as you need by following the steps above.
112