4.0

23
The included effect plug-ins
Flanger
Flanger is a classic flanger effect with added stereo en-
hancement.
The parameters are as follows:
Phaser
Phaser produces the well-known “swooshing” phasing ef-
fect with additional stereo enhancement.
The parameters are as follows:
Parameter Description
Tempo sync
on/off
The button below the Rate knob is used to switch tempo
sync on or off. The button is lit when tempo sync is on.
Rate If tempo sync is on, this is where you specify the base
note value for tempo syncing the flanger sweep (1/1 to
1/32, straight, triplet or dotted).
If tempo sync is off, the sweep rate can be set freely with
the Rate knob, without sync to tempo.
Feedback This determines the character of the flanger effect.
Higher settings produce a more “metallic” sounding
sweep.
Mix Sets the level balance between the dry signal and the ef-
fect. If the Flanger is used as a send effect, this should be
set to maximum as you can control the dry/effect balance
with the send.
Parameter Description
Tempo sync
on/off
The button below the Rate knob is used to switch tempo
sync on or off. The button is lit when tempo sync is on.
Rate If tempo sync is on, this is where you specify the base
note value for tempo syncing the phaser sweep (1/1 to
1/32, straight, triplet or dotted).
If tempo sync is off, the sweep rate can be set freely with
the Rate knob, without sync to tempo.
Feedback This determines the character of the phaser effect.
Higher settings produce a more pronounced effect.
Mix Sets the level balance between the dry signal and the ef-
fect. If the Phaser is used as a send effect, this should be
set to maximum as you can control the dry/effect balance
with the send.